The ledgers you already run, as one group

Consolidation software that leaves each entity on its own accounting system. Control maps every entity to one group chart of accounts, translates every currency and shows the eliminations in a column of their own. Click any group figure to see the entries behind it. Ask your own Claude, ChatGPT or Codex over MCP and it reads the same numbers down to the entries.

Control.dev is a group consolidation and FP&A platform for multi-entity groups. EPM for the AI era. Built in the Nordics.

Singa runs three entities in different systems and different currencies, and Control brings them together in one consolidated group view. Its group P&L for the annual report was ready with the new accounting entries, without an ERP project.

Last updated

Group P&LExample Group · September 2026 · EUR thousandsEliminations: onCurrency: EUR / localIllustrative data
LineFinland OyNetvisorServices OyProcountorUS IncQuickBooksUK LtdXeroEliminationsRule: management feesGroupEUR
Revenue600290400200−901,400
Cost of sales−215−120−150−75−560
Gross profit385170250125−90840
Operating costs−265−105−150−9590−525
EBITDA12065100300315
Open UK Ltd operating costs: the management fee from Finland Oy and its 3 entries, from Xero

UK Ltd · Operating costs −95 · of which management fee from Finland Oy −30

DateEntryAccountIn XeroIn EUR
30 Sep 2026Management fee, September7400 Management fees−£18,700−€22,000
30 Sep 2026IT services, September7400 Management fees−£4,250−€5,000
30 Sep 2026Finance services, September7400 Management fees−£2,550−€3,000
Management fee from Finland Oy−£25,500−€30,000

Translated at the September period rate of 0.85 pounds to the euro. The Eliminations column removes this fee together with the fees to Services Oy and US Inc: −90 in revenue, +90 in operating costs.

Eliminations net to zero in EBITDA.
In short

What is multi-entity consolidation software?

Multi-entity consolidation software combines the books of every company in a group into one set of group statements. It maps each entity’s accounts to a group chart of accounts, eliminates intercompany transactions and balances, and translates foreign entities into the group currency. Control.dev does this from the ledgers your entities already run.

The group close

What the spreadsheet did by hand, on every sync

Each sync brings the entity books in. The mapping, the eliminations and the translation run on them, so the group view follows the ledgers.

01

Your group chart, drafted for you

Control generates a first group chart of accounts from your entities’ accounts and proposes the mapping. Your team reviews it. New local accounts show as unmapped after the next sync, so nothing slips into the group total unseen.

Change a mapping and every report on that group account follows. There is no history view of past mapping states yet. Cost-centre reporting for industrial groups reads the same group tree by function and cost centre.

  • Many local accounts to one group account
  • Local cost centres and projects mapped to one group tree
  • One shared proposal when new accounts need new group accounts
02

Eliminations in a column of their own

Intragroup revenue and costs come out of the group view. A rule eliminates an entity or group account from a start date. A manual entry handles the one-off. The Eliminations column sits between the entities and the group total, so a one-sided entry shows before the board sees it.

Each elimination is an entry you can open, so your auditor follows it like any other posting. Buying companies? Buy-and-build group reporting starts an elimination rule on the acquisition date.

  • Rules by entity account or group account, from a start date
  • Manual entries for one-off eliminations and reclassifications
  • Eliminations reviewed apart from source and CTA rows
03

Every currency in the group currency

Pick the group currency and Control translates each entity from its own. Balances use the current rate and activity the period rate by default. Change the rule by account type, or make an exception for one account.

  • Rate type by account type, with account-level exceptions
  • Monthly rate overrides for company-approved rates
Fit

Who it fits, and who it does not

A fit

  • Groups of two or more entities

    Each entity keeps its own accounting system, from Netvisor and Procountor to Xero and QuickBooks, and the group needs one monthly view with eliminations and currencies.

  • Teams that plan on the same numbers

    Budgets and forecasts sit on the consolidated actuals, with the P&L, balance sheet and cash flow from one plan.

  • Teams that work with AI clients

    Claude, ChatGPT or Codex reads the consolidated group over MCP, down to the entries behind each figure.

Not a fit

  • Statutory year-end modules

    Control.dev has no IFRS 16 lease module and no disclosure-notes module. Control produces the group statements; the accountant prepares the statutory financial statements with notes.

  • One ERP for every entity

    If you want to replace the entity ledgers with one system, Control.dev is not that. It reads the ledgers your entities keep.

Advanced

CTA and group entries, in plain view

The adjustments that usually live in a side spreadsheet stay in the group view, each on its own line and each open to its entries.

04

CTA that keeps the group balance sheet balanced

Balances and activity translate at different rates, so a translated balance sheet can stop balancing. Control calculates the cumulative translation adjustment for every month and posts it to equity, split into Currency CTA and Elimination CTA.

  • Currency CTA and Elimination CTA, each to the equity account you choose
  • Calculated for every month, stored as monthly movements
  • Recalculated when rates or rate settings change
05

Group entries for what the ledgers do not hold

Post consolidation-only entries straight to the group chart of accounts, in the group currency, with an optional group dimension.

  • Entries on group accounts in the group currency
  • Optional group dimension and item on each entry

Your own Claude, ChatGPT or Codex reads this group over the Control.dev MCP server, and each ledger has a page on what it gives an AI client and what Control.dev adds: Finland (Netvisor MCP, Procountor MCP, Easor MCP); Sweden (Fortnox MCP, Spiris MCP); Norway and Denmark (Tripletex MCP, e-conomic MCP); global ledgers (NetSuite MCP, Xero MCP, QuickBooks MCP, Odoo MCP, Zoho Books MCP); Billing and exports (Stripe MCP, DATEV MCP). Weighing other tools? Open the comparison of Control.dev and AARO, Control.dev and Lucanet or Control.dev and Konsolidator (consolidation suites), Control.dev and Excel (spreadsheets), or all comparisons.

Questions

What group controllers ask before they connect

Ask us about your setup
What is financial consolidation?

Financial consolidation combines the books of every entity in a group into one set of group statements: each entity’s local accounts map to one group chart, intragroup activity is eliminated and every currency is translated into the group currency, with CTA. Control does this on every sync, from the ledgers your entities already run, and every group figure opens to its entries.

What is financial consolidation and close?

Financial consolidation and close is the month-end routine that ends in group statements: each entity closes its books, then intragroup balances are eliminated and currencies translated. Control.dev covers the consolidation and reporting steps, from each entity’s ledger, open periods flagged until they close. Managing the close as a task list with owners and sign-offs is a separate category of software.

What is a consolidation group?

A consolidation group is a parent company and the entities it controls, whose statements are presented together as those of a single economic entity. IFRS 10 (paragraph 7) says an investor controls an investee when it has power over it, exposure, or rights, to variable returns from it, and the ability to use that power to affect them.

What software consolidates financial statements?

Four kinds do: spreadsheets, the group module of an accounting system, statutory consolidation suites, and tools that read each entity’s ledger and consolidate above it. Control.dev is the last kind. It maps every entity to one group chart, eliminates intragroup activity, translates currencies and opens each figure to its entries. See how Control.dev compares with each kind of tool.

What accounting software is best for consolidated reporting?

No accounting package is best for every group. If all entities sit in one ERP, its own consolidation module may be enough. If they run different systems, the reporting needs a layer above the ledgers. Control.dev is that layer: each entity keeps its own system. Check which systems connect or book a demo on a sample group.

Do our entities need to use the same accounting system?

No. In Control, each entity connects its own system, from Netvisor and Procountor to Xero and QuickBooks, and maps to the same group chart. See which systems connect, and what comes in from each, on integrations.

Do eliminations change the entity books?

No. Control’s elimination rules and manual entries change the group view only. They do not edit or delete source transactions, and they never post back to an entity’s accounting system.

How are partially owned subsidiaries handled?

Control consolidates the connected entities in full. Minority interest presentation is handled with group-level manual entries, not automated ownership-percentage calculations.

What are intercompany eliminations?

Intercompany eliminations remove what the companies of one group sell to, owe to and pay each other, so the group statements show the group as one entity. IFRS 10 (paragraph B86) and the Finnish Accounting Act (chapter 6, section 7) both require them. Control.dev shows the eliminations in a column of their own, and each one opens to its entry.

What is a currency translation adjustment (CTA)?

When a foreign entity is translated into the group currency, assets and liabilities use the closing rate, and income and expenses the transaction-date rates or an average of them (IAS 21, paragraphs 39 and 40). The difference this creates is the currency translation adjustment (CTA), held in equity until the entity is sold. Control.dev calculates CTA every month.

Can we add entities later?

Yes. A new entity connects its own system and maps to the same group chart in Control, so the reports already in use pick it up without a rebuild.

See your ledgers as one group

Bring the systems your entities run and the questions your close raises. In 30 minutes we walk through a four-ledger sample group and what setup would take for yours.

The app works best on a desktop browser.

From €499 a month for multi-entity consolidation with three integrations, no implementation fee and a 30-day trial. See pricing.